How to use a VR Cardboard

To use virtual reality glasses you need a smart phone.

[cml_media_alt id='1500']71[/cml_media_alt]

                PersiaPort Virtual Reality Cardboard (Type A)

 

[cml_media_alt id='1727']VR1[/cml_media_alt]

   PersiaPort Virtual Reality Headset (Type B)

 

  1. go to the virtual reality page on persiaport.com: click here.
  2. Then choose one of the 360 degree photos or videos

[cml_media_alt id='1493']3[/cml_media_alt]

  1. make sure your screen is unlocked

In phones with IOS operating system do same as the following photo:

[cml_media_alt id='1494']5[/cml_media_alt]

In phones with Android operating system do as the following photo:

[cml_media_alt id='1495']photo_2016-02-22_16-09-00[/cml_media_alt]

Hold your phone horizontally to see a screen like this. Now you can watch the photo or video without glasses.

Touch “VR Setup” to set correct value for “VR Headset” as following:
For Virtual Reality Carboard (Type A), set “VR Headset” to “Cardboard A”.
For Virtual Reality headset (Type B), set “VR Headset” to “Cardboard B”.

[cml_media_alt id='1835']enter-vr-sign[/cml_media_alt]

After touching the cardboard sign the screen will be changed like this:

[cml_media_alt id='1507']63[/cml_media_alt]

Touch “VR Setup” to  set correct value for “VR Headset” as following:

[cml_media_alt id='1497']61[/cml_media_alt]

After setting touch “save” to fix the setting.  Finally choose “CLOSE” to make the photo or video ready for glass

[cml_media_alt id='1499']62[/cml_media_alt]

Finally put the phone inside the glass as the following photo

[cml_media_alt id='1500']71[/cml_media_alt]

Consider to put the phone exactly in the center of the glass

[cml_media_alt id='1501']72[/cml_media_alt]

[cml_media_alt id='1502']73[/cml_media_alt]

[cml_media_alt id='1503']74[/cml_media_alt]

 

[cml_media_alt id='1504']75[/cml_media_alt]

 

The type B

[cml_media_alt id='1786']5[/cml_media_alt]

Open the slider rail from side of cardboard:

[cml_media_alt id='1787']4[/cml_media_alt]

Put the set mobile phone in the slider like the following photo:

[cml_media_alt id='1788']2[/cml_media_alt]

Put the slider in the cardboard and close it completely:

[cml_media_alt id='1789']3[/cml_media_alt]

 

You can change the focal distance in the type B.

If the settings are done correctly, you will see “+” sign in the image clearly.

Put the cardboard on your eyes and enjoy your virtual presence in the place!

Editorial Team
editorial team
0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *